-=> MOONDOG wrote to GAMGEE <=-

MO> Having an "all original" firearm that seen action isn't realistic.
MO> Pins go bad or fall out, springs get worn, barrels get shot out, and
MO> receivers and stocks sometimes crack.

Very true! So far, my Belgium Browning SA-22 is all original as far as
parts, but it has been refinished with Cerakote, which is, of course, not
permanant if I want to remove it.

But so far - knock on wood - all the internal parts are the same!




... Jokes about German sausage are the wurst.
--- MultiMail/Mac v0.52
þ wcQWK 8.0 ÷ Omicron Theta * Memphis, TN * winserver.org

Re: all original
By: JIMMY ANDERSON to MOONDOG on Mon Jun 01 2020 12:26 pm

> -=> MOONDOG wrote to GAMGEE <=-
>
> MO> Having an "all original" firearm that seen action isn't realistic.
> MO> Pins go bad or fall out, springs get worn, barrels get shot out, and
> MO> receivers and stocks sometimes crack.
>
> Very true! So far, my Belgium Browning SA-22 is all original as far as
> parts, but it has been refinished with Cerakote, which is, of course, not
> permanant if I want to remove it.
>
> But so far - knock on wood - all the internal parts are the same!
>
>
>
>
> ... Jokes about German sausage are the wurst.

My father was trained to be a machinist in the Army back in the early 1960's.
He was stationed in Germany, and assigned to work in a repair shop. The
armorers would perform triage on firearms coming into the shop, then send the
parts to machinists with a description of services to be performed. He said
the most common problem was roll pins would eventually wear down from
constant insertion and removal during cleaning, and the armorer's cure was
tapping threads in the pin holes and replacing the pins with screws. He said
some of the older armorers were really sharp, and would secretly build
theirselves up competion grade 1911's. They would tighten up the slides with
a vise, then polish and stone all the contact surfacee and adjusted trggers.
There were regualr inspections and suspicion that some guns were not being
documented or destroyed as claimed, however the smiths would be in a constant
game of hiding things.

---
þ Synchronet þ The Cave BBS - Since 1992 - cavebbs.homeip.net

-=> MOONDOG wrote to JIMMY ANDERSON <=-

MO> My father was trained to be a machinist in the Army back in the early
MO> 1960's.
MO> He was stationed in Germany, and assigned to work in a repair shop.
MO> The armorers would perform triage on firearms coming into the shop,
MO> then send the parts to machinists with a description of services to be
MO> performed. He said the most common problem was roll pins would
MO> eventually wear down from constant insertion and removal during
MO> cleaning, and the armorer's cure was tapping threads in the pin holes
MO> and replacing the pins with screws. He said some of the older armorers
MO> were really sharp, and would secretly build theirselves up competion
MO> grade 1911's. They would tighten up the slides with a vise, then
MO> polish and stone all the contact surfacee and adjusted trggers. There
MO> were regualr inspections and suspicion that some guns were not being
MO> documented or destroyed as claimed, however the smiths would be in a
MO> constant game of hiding things.

LOL - that's funny, and totally believable! Love hearing stuff like that!




... Hey, look! A completely new undocumented fea&%$#*@ NO CARRIER
--- MultiMail/Mac v0.52
þ wcQWK 8.0 ÷ Omicron Theta * Memphis, TN * winserver.org